Woodworking With Jarrah

One of Australia's finest and most versatile timbers, Jarrah, a native of south-west Australia has been used since European settlement for a wide range of woodworking products. While Jarrah is hard, strong and easy to work with, woodworkers have found a few challenges that the wood presents, and need to know how these can be overcome.

Unlike other Australian wood such as blackwood or Queensland walnut, Jarrah has no appreciable silica content, so cutting blades do not wear out excessively from abrasion. The cutting blades however do tend to chip or crumble because of Jarrah's hardness. For cutting Jarrah, it is advisable to use a well tuned spokeshave or handplane. You may use a high 30 ° bevel on the blade and keep it sharp. A well tuned card scraper also works perfectly and an experienced woodworker can get a beautiful 'off the tool finish ".

Jarrah as a species shows a broad range of color variation over the length of a board. This can go from spotted dark at one end to a clear light pink at the other. Many large woodworking companies get over this challenge by putting a color wash over the Jarrah to even out the differences and using lacquer finish to dull the reds and yellows. To ensure the best color match ensure using the same source of supply as this increases the likelihood of the boards coming from the same tree in a sequence for a better color match.

Woodworkers should also be aware that Jarrah has a distinctive grain, and must be matched for grain type as well as color. It is easy to fall into the trap of having two boards of the right color but the wrong grain. This occurrence can be exaggerated if backsawn and quartersawn boards are liberally mixed in a pack. A good idea when new stock is received is to lightly skim the best face over the planer and write a code on the endgrain. The boards can then be stacked according to whether they are quartersawn or backsawn.

Most woodworkers are aware that Jarrah reacts very badly to direct sunlight and becomes powdery yellow when exposed to strong light. Jarrah furniture should get only diffused natural light and is good for bedroom furniture. Woodworkers should also exercise caution with lacquering, as lacquer appears to hasten discolouration and makes fixing discolouration even worse.

With joinery, woodworkers should not make the joints too tight. Jarrah does not compress the same way as softer woods. For instance in a mortise tenon with tight tenon cheeks, if the joint is forced together, the mortise will split along the grain above and below to accommodate the tenon. Woodworkers who make furniture such as chairs with small component section sizes in particular find this difficult.

Careful color matching, covering work between sessions, fitting the joinery correctly and using a few extra coats of finish are some ways that woodworkers can overcome the challenges of working with Jarrah. Ensuring these are carefully considered, working with Jarrah is an experience that few other woods can offer.

Source by Tamara Korremans

Finding Woodworking Projects and Plans for Beginners

If you are beginner and very interested in doing a DIY project for home then, woodworking can be interesting. If you do not have the proper information, instruction, and skill, you may land up spending more money and time than you originally intended to spend. As a beginner woodworker, you need have the space, time and the correct tools. Having said, there are a few essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are beginner, you should first need to be very interested in woodworking. Creating something new with your own hands is a special feeling. Do not start a project if you are not interested, as this may land you in a bad place.

2. Think of the main reason of creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and analyze the time you have, before you start with a project.

4. Start projects that you can finish. If you are in the middle of some work, then it is better not to start any project at all.

If you keep these essential points in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to start with. As a beginner, always select a project that has a very basic build up or a simple construction. Some easy to begin projects include, bird feeder, benches, shelves, etc. As soon as you get hold of the techniques, you can always move to the next level of woodworking projects, like cabinets, sheds and others. Beginning projects should always be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools

Tools are the means through which you will win the battle of woodworking. Many people think that power tools are needs. However, for beginners basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench when fixed with vises offer ample space to work. As a primary tool, workbench should be a part of your beginner's woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc. A small and lightweight hammer will make things much easy for you. When you buy a hammer, always check the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. This tool helps you to cut woods at different sizes. There are different types of saws available in the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you in advance woodworking. You can also buy power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require wrench. However, this is not a tool for beginners, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking projects. Based on the type of project you want to complete, pricing can be determined. The simple the project, the less cost it involves. However, at the very beginning buying the tools will be a little hefty. Therefore, it is better to fix a budget first on the tools, then on the project. Buying the basic tools will ensure that you do not need to buy any more material other than the wood ply.

Time and Instructions

Instructions are one of the primary things that every beginner should follow. It is like the woodworking Bible. Instructions guide is a very easy to understand process, what to do and how to do it. It is a systematic guide for completing the project. Time also plays an important role in the building of woodworking projects. Woodworking projects require time and therefore it is necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing that will help you to achieve success is proper planning. With proper planning and a strategy, it is possible to achieve success quickly. If you know the purpose of woodworking, the item you want to build, the tools you require to own and the average time you can give every day; then you are all set to go.

Conclusion

All these tips and instruction will make the woodworking projects and plans for beginners fast to complete. Always make sure that you have all the essential tools, materials, space ready. Keep the instructions of building an item handy. Proper strategy and planning will help you to make a great woodworking project for your home.

Source by K. Madeaw

Make Money in Woodworking

Want to make a profit in woodworking?

I was working at the post office after I obtained my degree. I wanted a career where I would be responsible for making most of my decisions. My dad had built boats, houses and many other large projects involving wood. He used his head and his talent to project his ideas into visual objects. Artists and craft persons were numerous in my family. My wife was an artist and a free spirit, willing to take a chance on her dreams.

My wife spoke and made inquiries to big mail order companies. She finally landed a contract to make the wooden boxes in which the company shipped their variety of candy. We had our beginning. From there we actually sent our own ideas in wood to the company which they eventually accepted and put into their catalog. We did a brisk business selling our products to this company. I was still at the post office. I would work all day at the post office and come home and work until midnight. On the weekends I stayed busy much of the time. The orders grew until I could no longer produce the orders by myself. We outsourced work in order to produce our product in a timely manner. I gained a contract from a local company that had business and were selling products on a national level. These guys were perfectionists and I learned quite a bit from them.

My wife used her artistic talent to incorporate herself into my woodworking. She was as big a part of the company as was I. My wife, being the better business person, used her business acumen to get us contracted as a vendor in one of the showrooms in the world trade center that was located close to our home . We became part of one of the sellers that had a permanent location at the center. Our business sky rocketed. They gave us ideas and we came up with some of our own. We stayed with this company until the owner passed away and our relationship with the new manager began to deteriorate.

We next opened a wholesale business in which we were show cased in 9 show rooms across the country and in some mail order catalogs. Business was booming. We ended up renting 2 adjoining suites in a business district close to our home. I worked in one suite with all of my power tools. We also had accommodating space for shipments of truck loads of wood and other essential items. The front part of my suite was used as a show room to exhibit our products. My wife and about 20 employees worked on the other side in another suite. We outsourced work which we could not handle ourselves. We produced over 350 items which were show cased in our catalogues.

My wife and I had small children and obligations other than a busy work schedule. We combined the two. I thought that we had reached a good compromise in juggling the two different aspects of our lives. Buying school supplies and thousands of board feet of wood simultaneously became routine.

After many years in the wood working business we moved on to other careers. I, like my father before me, enjoyed being immersed in the different fields of wood working. I still enjoy wood working to this day. I have built furniture for friends and family. Whenever there is a project that needs to be done and no one can find the object of their desire at the right price, I am called upon to produce the object of their fantasy. I have built room additions, free standing structures, kids play houses and forts. I have even had time to work on the object of my obsession. I built a hydroplane boat with racing capabilities which was not exactly the fantasy my wife had always dreamed about. I survived that experience. Today is our joint celebration of our thirty-fifth wedding anniversary. We are looking forward to many more happy years experiencing life together.

Source by Stephen Graham

Three Products With Great Woodworking Plans

There are lots of different products with great woodworking plans on the Internet today and it can be really hard to determine which product will provide you with what you need in order to achieve your woodworking goals. This article covers the fundamentals of several different woodworking products and what they offer their users. I am going to start off with what I have found to be the best woodworking product and then review what I have found to be the second and third best woodworking blueprint products.

Teds Woodworking Plans

Teds Woodworking Plans is the first product that I am going to review and this product is a collection of great wooden plans. It's actually one of the best collections of woodworking plans that you can buy today! These wooden plans consist of more than 16,000 blueprints and include over 100 different categories of plan types. These categories include but are not limited to: bird house woodworking plans, furniture woodworking plans, and garden woodworking plans.

In addition to the various categories that Teds Woodworking Plans provides its customers, it also provides its customers with four great bonuses. The coolest of these bonuses is another software program that is called the DWG or CAD software . This software program allows users to analyze the woodworking blueprints in more detail. You can even edit or create your own wooden plans with this software program. The great options that the DWG or CAD software offers its users is one of the reasons that Teds Woodworking is the best set of wooden plans for customers to buy. This product also comes with three other bonuses: premium woodworking videos, how to start a business woodworking guide, and the complete woodworking carpentry guide. These additional bonuses are great tools to help customers learn more about woodworking and how to get involved in the industry if woodworking is something you are really passionate about.

My Shed Plans Elite

My Shed Plans Elite is another product with great woodworking plans. Ryan Henderson created this product and he has over 20 years of woodworking experience in building wooden sheds. Throughout his career, he faced many of the same dilemmas that the creator of Teds Woodworking encountered, mainly, poorly written and understandable wooden plans. The My Shed Plans Elite product contains over 12,000 different wooden plans and blueprints. There are a lot of shed plans in this product in addition to hundreds of other plans in various categories.

My Shed Plans Elite also contains several bonuses as well. These bonuses are called: project sets and plans with 12,000 designs, detailed plans and how-to guides, more than 12,500 woodworking blueprints and projects, and a book with lots of tips, tricks, and secrets that professional woodworkers use. These bonuses provide you with more detailed information in regards to the woodworking, which will allow you to breeze through you woodworking projects. A couple of other great features that this woodworking product provides its users are a money-back guarantee and a couple customer support options.

Overall, this product is a great set of wooden plans to help you achieve any of your woodworking projects.

Woodworking 4 Home

The last product that I am going to review is called Woodworking 4 Home. This product is a fairly new product and that's the reason I have this product listed as the third best woodworking blueprints product. As this product continues to impress me, I will most likely move this product up the ranking list. This product contains over 14,000 woodworking plans and projects. These plans are categorized into over 100 different categories that include anything that you would want to build through woodworking.

The product developer for Woodworking 4 Home has designed this product so that it is very easy to navigate through. The wooden plans are very easy to follow and set up in a step-by-step format for users. These plans are also great for intermediate and advanced woodworking users as well. If you decide to purchase this product then you will be able to use the product for 60 days under their money back guarantee. In addition, you can contact customer support if you have any questions in regards to the product.

Quick Review:

In conclusion, these are three products with great woodworking plans and my number one pick is Teds Woodworking Plans. I choose Teds Woodworking for a variety of reasons, mainly, the large number of wooden plans and for the additional bonuses provided in the software package. I hope this review has been helpful and that it leads you to find a woodworking product with great woodworking plans.

Source by Ryan Thomas P

Great Woodworking Plans For Home Projects

Woodworking is an acquired skill that develops into an art and as with everything you seek to achieve in life, practice makes perfect. If you are interested in getting started with woodworking then there are some great products with great woodworking plans. In this article, I am going to provide you with some additional information on a product with great woodworking plans. This product is called Teds Woodworking Plans and is considered to be the best overall collection of woodworking blueprints on the Internet.

A Brief Review of Teds Woodworking Plans

Teds Woodworking Plans is a set of great woodworking plans! Ted McGrath created this product and he has over 35 years of woodworking experience. Ted created this product in order to produce some really good woodworking blueprints that anyone can follow. These plans have been designed to be step-by-step and are suitable for beginners as well as experts. This woodworking package comes with over 16,000 different woodworking plans and these plans are grouped into over 100 different categories that include categories with lots of designs for birdhouses, furniture, tables, cabinets, and much more. Basically, you can find wooden plans for anything that you want to make with this product. In addition, this product also comes with several other great features to help its users be as successful as possible with woodworking.

Four Great Bonuses

Some of you may be interested in getting into woodworking for an additional hobby where as other people may want to turn their passion for working with wood into a career. The great thing about Teds Woodworking Plans is that this product is suitable for people who are interested in both of these areas. This product comes with four bonus features, which includes a CAD software program, premium woodworking videos, a guide that teaches you how to start a woodworking business, and a 200-page guide called the "The Complete Woodworking Carpentry Guide." The CAD software program is a really awesome feature because it allows people to modify and develop their own woodworking blueprints in addition to analyzing and editing the woodworking blueprints already in this product. Out of all of the products with great woodworking plans that I have reviewed, Teds Woodworking is the only product that has this type of software program available at an affordable price. There are other professional software programs available to people interested in carpentry but cost several hundred dollars. Ted had this program developed so that it would provide new students and experienced students with a super valuable tool at an affordable price. A couple of other bonuses that this package offers its users are customer support and 60 days that you can use a money back guarantee. Overall, this is by far the most comprehensive and detailed woodworking product with great woodworking blueprints. In addition to all of the positive remarks about the Teds Woodworking product, there are some negative remarks that need to be mentioned as well.

Negative Remarks

One of the biggest negative remarks that I have found with the product called Teds Woodworking plans is that it cost $ 67 dollars where as its closest competitors are priced at $ 37 and $ 49 dollars. These two competitors are My Shed Plans Elite and Woodworking 4 Home. One of the reasons that these competitors are available at lower prices is because they do not have a CAD software included in their product. Based on how much these CAD software programs cost separately, I personally think the CAD software is definitely worth the extra $ 20 or so dollars.

Overall Review:

The plans in Teds woodworking plans have great woodworking blueprints for its users to use and grow with. These plans are suitable for beginners and advanced woodworkers. This package has the largest collection of woodworking blueprints and provides its users with several great bonuses to help them become the best carpenter that they can be.

Source by Ryan Thomas P

Beginning With Woodworking Basics

Most all of us that have come to love woodworking have gotten there because of our passion to work with our hands to build things of lasting value.

Whether is the desire to create something that you could stand back and truly call your own or even perhaps a combination of that and the fact that you just don't want to pay for the overpriced high profit pieces of furniture you find in retail stores .

Regardless of how you've come to be interested in learning more about the basics of woodworking, it's important that you begin by getting your arms around that which you'll be working with … the wood.

Wood comes in a variety of properties and it is important that when you are just learning the basics of woodworking that you gain an understanding of these basic properties.

Wood changes when exposed to external elements such as weather and the stress and pressure that it may be exposed to and it expands and contracts over time. So, it's important to know and be able to recognize why wood acts the way it does in various situations and environments.

Generally speaking, the various varieties of wood that you'll be working with will come from one of two different categories. They will either be a hardwood or a softwood.

So, the first basic of woodworking is knowing which type of wood is which and also knowing which type to use for the woodworking project you are considering. And as you get a bit further into the woodworking basics you'll come to discover other types of manufactured wood products that offer much of the same beauty as the natural wood but you won't have to worry about it changing its shape over time.

Just beyond learning about the different types wood and the options that they offer you, is learning about and beginning to acquire woodworking tools. All of us woodworkers love tools and love buying new tools. It is these woodworking tools and learning how to use and master them that will allow you to build just about anything that your mind's eye can imagine.

There is a lot to learn when it comes to woodworking. In fact, you'll never really stop learning and manufacturers will always be coming out with new wood products, new tools, new adhesives, new finishes, and on and on.

You've got a whole life ahead of you in the world of woodworking so don't rush, be sure to get the woodworking basics under your belt first and build from there.

Source by Jeff Foster

Woodworking Precision Measuring and Marking Tools

If you are just getting started with woodworking these are some basic measuring and marking tools that you should own.

Measuring Tape

Having a measuring tape handy helps you take measures on the fly. Measuring tapes are available in "Imperial" format or "Standard" / metric version. Typical lengths are 16, 25 and 30 feet.

Ruler

Always keep at least one good ruler in your workshop. You will use a ruler for a wide range of tasks, like plan drawing, measuring of material, table saw wing alignment and surface regularity check, among other things. It's always better to invest in a steel ruler.

Combination Square

If you are just getting started with woodworking, buying a combination square is an excellent investment.

A combination square will help you measure 90 ° and 45 ° angles, determine flatness, measure the center of a circular bar and mark the work surface.

A classic combination square consists of: 1) a square head and 2) a steel ruler. By sliding the square head along the steel ruler, it is possible to depth gauge or transfer dimensions.

Framing Square

A framing square (also called steel square or carpenter's square) is also another useful tool to own. It is made of steel and consists of 2 arms: a long arm and a short arm meeting at 90 °.

Having a framing square will allow you to measure any construction design that you need. Typically, framing squares can be found with a 24 inch blade and a 16 inch tongue. There are also smaller ones but they come without the framing tables.

Marking Gauge

The marking gauge is used to mark out lines before cutting. It allows you to draw a line parallel to a reference edge. Generally, the marking gauge consists of a beam, headstock, pen, pin, wheel and knife.

Scratch Awl

The scratch awl is basically a steel spike with a sharp tip. It etches a shallow groove on the wood that you can follow when using a hand saw or a chisel.

Sliding Bevel

Using a sliding bevel, wood cutting will be much, much easier and smoother. The sliding bevel is basically a gauge that allows you to set and transfer angles. It consists of a handle, usually made of wood or plastic, connected to an adjustable metal blade.

Knife

The Drawknife cutting tool is classically used by chair makers. It usually consists of an 8-12 inch long straight blade and perpendicular handles at each end.

The Froe (also called lathe ax and splitting knife) is a tool used for riveting or splitting. The froe has an 8-12 inch long straight blade and a perpendicular handle at its end.

The Scorp is a drawknife with an almost completely circular blade. Very handy to hollow out bowls and similar objects.

The Utility Knife is a knife with has a retractable blade that is sheathed inside a metal handle. Available in all sorts of sizes, the utility knife is used in woodworking to cut all types of materials.

Dial Gauge

The dial gauge is a caliper with a dial readout in the hundredths or thousandths of an inch. You can use it to measure the depth of a hole. It's an ideal tool to use for precision measurements from cylindrical tenons and mortises.

Source by P. Wheeler

Money From Woodworking – Do You Have What It Takes To Turn Your Woodworking Hobby Into A Business?

You enjoy woodworking as a hobby. But have you ever thought about making money with it? If you haven’t, you’re not alone. Here are three misconceptions that might have been holding you back. In this article, we’re going to debunk them so you can build your thriving business!

The reason most people who enjoy woodworking as a hobby don’t even think about making money with it is that they simply can’t imagine anyone paying them for their creations. And even if they could, they wouldn’t know how to get started finding the people who WOULD pay them.

So let’s look at three of the most common objections and take them apart – I bet you’ll start to see the possibilities.

1) I’m not good enough

That’s the most common objection of all. Most of us have been so browbeaten over the years that we feel that nothing we do is good enough, especially the things we do “just” as a hobby.

Sure, someone who is a ‘real’ woodworking professional or even a woodworking artist might be able to make money with it, but YOU? Not a chance.

Or so you think. But guess what? That’s not at all the case. There are quite a few woodworking hobbyists out there who are making a very nice living at it, and you’re probably as good as any of them.

2) Who would want my stuff?

Even if you believe you actually MIGHT be good enough, the next hurdle is who would want to buy what you make. Well, prepare to be surprised. There are LOTS of people out there who will happily send you money in exchange for certain woodworking products that you can create in an hour or two.

You may not know where to find those people yet, or how to help them find you, but you can learn. It’ll be worth it.

Which brings us to the next objection.

3) I don’t know where to start

Obviously, there are lots of questions that you need answered. Which handmade wood products are the most popular? How to create the products you can sell?

And how to get your products in front of those eager buyers so they can send you money. Not to mention how to find the time and space for your new business. And on and on it goes.

But you shouldn’t let that stop you. Find a comprehensive guide on how to turn your woodworking hobby into a woodworking business, study it, and get to work.

Source by Elisabeth Kuhn

Beginner Steps to Take When Getting Started In Woodworking

If you have a passion of producing your own woodwork crafts then you should consider setting up your own woodworking workshop and become an independent craftsman. This is a great past time hobby that you can do to do something productive all in the comfort of you home. But just every other hobby out there becoming a woodworker requires you to know the basics to the hobby.

Below are some guidelines that every beginner should follow when getting started in this wonderful hobby:

– Know Your Wood

When you are doing your project you don’t just take any kind of wood to build the project but you choose the right type of wood that is suitable for the finish craft. Wood falls into 2 categories which is hardwoods and softwoods. Choosing the type of wood to use depends on the use of the craft.

For example if you will be building a garden table then most probably you will need hardwood since the table will be exposed to outside conditions like rain. But maybe if you are creating a computer stand then you can use soft wood since a computer is not heavy and stays indoors.

– Know Your Tools

In order to create wood crafts you have to have certain tools and machinery to help you cut out the wood and assemble the pieces together. The tools come in two forms which are hand tools and power electric tools. If you will be doing big projects then you will need power tools but also keep in mind that power tools are large and will require you to have a large room.

– Project Plan

For your project to be successful you will need a project plan. A project plan will let you know what you will need to create the craft. You will have to know the type of wood suitable for the craft, the required tools, and the time frame that you can complete it.

– The Assembly

Making different projects requires you to know how to safety and effectively assemble the wood to produce the project at hand. You have to know of the different joints like tenon joints and dovetail joints. And the different types of fasteners and glue used to stick the wood together.

Learn all the above and you will be on your way to creating professional projects. When starting out don’t go for difficult projects but start with simple ones then later on take on the larger ones.

Source by Rogue Oranum

Woodworking and Woodworking Plans

Woodworking can be either a hobby or career or both. Either way it gives a lot of satisfaction when you can stand back and look at the finished article and say to yourself: "I did that".

Of course as with most things in life it is best to plan or to have plans to help you start and be heading in the right direction. A good set of woodworking plans is essential otherwise you could end up spending more than is necessary on timber that you do not need. Most good sets of plans will include a cutting list as well as other important things that you will need. The cutting list for example will show just how much timber you will require for that particular job. Also the plans will tell you what you need by way of fixings (nails and screws) and what tools you need to complete that job.

-Another important thing to take into account is exactly where you can lay your woodworking plans: you need the room to lay your plans for easy reference, also that you have enough room left to build whatever it is you are attempting. Ideally a good sized shed or workshop is a must, failing that you could always build it outside, weather permitting.

-The place to start would be to obtain a set of woodworking plans that will show you how to build your own shed to start with, then you could get plans to build whatever you wanted.

-Be very careful when looking to buy woodworking plans, or any plans for that matter because some will "skimp" on the important details which will leave you scratching your head and not knowing what to do next. The plans should go into great detail as most people are attempting to build something themselves for the first time. You must make sure that they give a step by step guide on what to do and when to do it and make sure that you follow by the letter. Whatever you decide to build with a good set of plans, it will have been built before by experts who through these plans will show you the quickest and easiest way to put something together without incurring any problems. If you try and do it your own way believe me you will find yourself getting in all sorts of difficulties, because when most things are built they are done in the most efficient way possible.

Woodworking plans take on a whole new perspective if you try your hand at boatbuilding for which you would obtain a set of boatbuilding plans. Boatbuilding is a different ball game, because for the majority of the time you are building from a center- line and squaring off it, unlike a house you have no square corners to build from. It is because of this fact and sometimes building off a curved surface, it is sometimes best left to a professional boatbuilder who will build from scale plans to the customers requirements. Having said that many people have tried and have been very successful, so if you feel confident then why not have a go.

– Hopefully this has given a fairly comprehensive insight as to why it is necessary to buy good woodworking plans as it will save you both time and money.

Source by Trevor W Townshend